Similar Products:(Per drawing)
EBAY on retail platform, our aim is integrity management, service-oriented.
EBAY:Â Â Â http://stores.ebay.com/fhi-us2014
a variety of models to choose:
Suction precision dispensing valve
product manual:
Elevating the design of more efficient and timely closing of plastic to prevent Epoxy, drawing objects.
Technical Parameters:
Type 1:
Back suction lift
Operating Air Source / Using gas source
3-7Kgf / cm
Min.Shot Volume / minimum discharge rate
0.01ml
Operation Viscositi / operating viscosity
1-1.000.000cps
Wet Body Material / main material
Aluminum
Material Input Pressure / Feeding pressure
<10kg
Material Inlet Outlet Size / feed inlet size
1/4 "npt (f)
Operating Cycle / operation rate
<600 / min
Overall Dimensions (mm) / Dimensions
(D) 31 × (H) 110
Weight / Weight (g)
220g
Application materials: epoxy, silicone, and other viscosity range of adhesives in 1-1.000.000cps
product manual:
with any of the feed pump or accumulator pressure tank connection.
can be accessed by all kinds of needles out of the mouth.
Technical Parameters:
Type 2:
Top pin
Operating Air Source / Using gas source
3-7Kgf / cm
Min.Shot Volume / minimum discharge rate
0.01ml
Operation Viscositi / operating viscosity
1-1.000.000cps
Wet Body Material / main material
aluminum
Material Input Pressure / Feeding pressure
<300 Kg
Material Inlet Outlet Size / feed inlet size
1/8 "pt (f)
Operating Cycle / operation rate
<600 / min
Overall Dimensions (mm) / Dimensions
(D) 21 (H) 130
Weight / Weight (g)
 Production equipment
Detection Device
Certificate
FAQ
1.Are you a manufacturer?
---Yes, we are. Warmly welcome to visit our factory at any time.
---We can according to your usage and design the hardware for you. Also can according to you drawing.
---We can give you best design and save more cost for you.
2.How does the ADL control the quality?
---During processing, the operating machine worker inspect the each sizes by themselves.
---After finished the first whole part, will show to QA for full inspection.
---Before shipment, the QA will inspect according to ISO sampling inspection standard for mass production.
---Inspection equipment: Hardness test, salt spray endurance test, mechanical sizes test, RoHS report, Â Â certificate of material and etc as per your need.
3.What's the payment term?
---100% T/T in advance normally; 50% deposit, 50% balance by T/T before shipment when order amount over 5000USD.
4.What's the delivery time?
---Normal, 7-15 working days for sample. 12-30 working days for mass production.
--If any urgent parts, we can provide preferential processing and control the delivery time as you required.
5.What is the standard of package?
---Inner is PP bag or separate Blister plastic box, keep no scratch and damage.out is carton. Then pallet. Carton size: 23*23*16, and pallet size is: 100*100*50, or as your requirement.
6.Can we get some sample?
---Sample can be provided, The clients will bear the shipping cost. The Sample cost is about 100-500 USD for each part, And it will be refund after order the mass production.
Â
Product Name:Suck-back single fluid Glue type pneumatic solenoid dispensing valve (Dispense Valve-5)
Similar Products:(Per drawing)
EBAY on retail platform, our aim is integrity management, service-oriented.
EBAY:Â Â Â http://stores.ebay.com/fhi-us2014
a variety of models to choose:
Suction precision dispensing valve
product manual:
Elevating the design of more efficient and timely closing of plastic to prevent Epoxy, drawing objects.
Technical Parameters:
Type 1:
Back suction lift
Operating Air Source / Using gas source
3-7Kgf / cm
Min.Shot Volume / minimum discharge rate
0.01ml
Operation Viscositi / operating viscosity
1-1.000.000cps
Wet Body Material / main material
Aluminum
Material Input Pressure / Feeding pressure
<10kg
Material Inlet Outlet Size / feed inlet size
1/4 "npt (f)
Operating Cycle / operation rate
<600 / min
Overall Dimensions (mm) / Dimensions
(D) 31 × (H) 110
Weight / Weight (g)
220g
Application materials: epoxy, silicone, and other viscosity range of adhesives in 1-1.000.000cps
product manual:
with any of the feed pump or accumulator pressure tank connection.
can be accessed by all kinds of needles out of the mouth.
Technical Parameters:
Type 2:
Top pin
Operating Air Source / Using gas source
3-7Kgf / cm
Min.Shot Volume / minimum discharge rate
0.01ml
Operation Viscositi / operating viscosity
1-1.000.000cps
Wet Body Material / main material
aluminum
Material Input Pressure / Feeding pressure
<300 Kg
Material Inlet Outlet Size / feed inlet size
1/8 "pt (f)
Operating Cycle / operation rate
<600 / min
Overall Dimensions (mm) / Dimensions
(D) 21 (H) 130
Weight / Weight (g)
 Production equipment
Detection Device
Certificate
FAQ
1.Are you a manufacturer?
---Yes, we are. Warmly welcome to visit our factory at any time.
---We can according to your usage and design the hardware for you. Also can according to you drawing.
---We can give you best design and save more cost for you.
2.How does the ADL control the quality?
---During processing, the operating machine worker inspect the each sizes by themselves.
---After finished the first whole part, will show to QA for full inspection.
---Before shipment, the QA will inspect according to ISO sampling inspection standard for mass production.
---Inspection equipment: Hardness test, salt spray endurance test, mechanical sizes test, RoHS report, Â Â certificate of material and etc as per your need.
3.What's the payment term?
---100% T/T in advance normally; 50% deposit, 50% balance by T/T before shipment when order amount over 5000USD.
4.What's the delivery time?
---Normal, 7-15 working days for sample. 12-30 working days for mass production.
--If any urgent parts, we can provide preferential processing and control the delivery time as you required.
5.What is the standard of package?
---Inner is PP bag or separate Blister plastic box, keep no scratch and damage.out is carton. Then pallet. Carton size: 23*23*16, and pallet size is: 100*100*50, or as your requirement.
6.Can we get some sample?
---Sample can be provided, The clients will bear the shipping cost. The Sample cost is about 100-500 USD for each part, And it will be refund after order the mass production.
Â
Suck-Back Single Fluid Glue Type Pneumatic Solenoid Dispensing Valve
Model NO.: Dispense Valve-5
Media Temperature: Medium Temperature
Trademark: OEM
Transport Package: According to Customer`S Requirement
Specification: 15*89white
Origin: Guangdong, China (Mainland)
Model NO.: Dispense Valve-5
Media Temperature: Medium Temperature
Trademark: OEM
Transport Package: According to Customer`S Requirement
Specification: 15*89white
Origin: Guangdong, China (Mainland)
Product Name:Suck-back single fluid Glue type pneumatic solenoid dispensing valve (Dispense Valve-5)