This used to be a standard rule, but with modern vehicles and synthetic oils, that number is outdated. Most newer cars can go up to 7,500 miles or more between oil changes. Always refer to your owner’s manual for the recommended interval—your car will thank you for it. Many people think coolant should be flushed every time they change their oil, but that’s not the case. Coolant is designed to last much longer, typically around 60,000 miles or five years. It’s important to follow the manufacturer’s guidelines rather than assuming you need it more often. Not all cars require premium gas. If your vehicle is designed for regular fuel, using premium won’t improve performance or fuel efficiency. In fact, it could just cost you more without any real benefit. Check your owner’s manual before filling up. The number on your tire’s sidewall shows the maximum pressure, but that’s not what you should use. The correct inflation level is usually found on the driver’s side door jamb. Using that number ensures better handling, fuel economy, and safety. Don’t forget to check your tire pressure monthly. It’s a common belief that all four tires must be replaced at once, but that’s not always necessary. As long as your tires are in good condition and have similar tread depth, you can replace them one at a time. However, if your tires are worn unevenly, it may affect handling and safety. The timing belt is a critical component, and ignoring it can lead to serious engine damage. Many people wait until 60,000 miles to check it, but it’s best to inspect it regularly—ideally during each oil change. A broken timing belt can result in costly repairs or even a total engine failure. Some drivers believe they must get all maintenance done at the dealership to keep their warranty valid. This is a myth. As long as you follow the manufacturer’s maintenance schedule and keep records, your warranty remains in effect no matter where you get your work done. Whether you need an oil change, tire service, or other routine maintenance, make sure you’re getting the right care for your vehicle. At DaSilva’s Auto Body, we provide reliable and honest service to keep your car running smoothly. Contact us today to schedule your next appointment and take control of your vehicle’s health. DANIELI 1000 Series Rolling Guide DANIELI 1000 series rolling guide is a kind of equipment used in steel production line, mainly used to guide and control the rolling of steel billet in the production process. It consists of a set of rolling guide rails and guide rollers, which can ensure the smooth rolling of the billet on the production line and reduce the friction and loss between the billet and the equipment. Danieli 1000 Series Rolling Guide,Rolled Steel Guide Heat-Resistant Equipment,Carbon Steel Rolling Guide,Various Series Of Rolled Steel Rolling Guides JINGJIANG EASTSUN METALLURGICAL MECHANICS CO.,LTD , https://www.jesguide.comWhen it comes to keeping your car or truck in top shape, it's easy to fall for common myths that can lead to unnecessary costs and even damage. From oil changes to tire pressure, many of these misconceptions are still widely believed. Here are seven auto care myths you should be aware of—and why they might be doing more harm than good.
1. Changing the Oil Every 3,000 Miles
2. Flush the Coolant with Every Oil Change
3. Always Go for Premium Fuel
4. Inflate Tires to the Number on the Sidewall
5. Change All Four Tires Together
6. You Can Be Lax About the Timing Belt
7. Warranties Tied to Dealer Maintenance
DANIELI 1000 series rolling guides have the following features and advantages:
1. High-quality material: It is made of high-quality alloy steel material, which has good wear resistance and corrosion resistance, and can run stably for a long time.
2. Precise design: The rolling guide rail and guide roller are precisely designed and processed to ensure the accuracy of their size and shape, as well as the matching degree with the steel billet, so as to achieve a stable rolling effect.
3. Automatic adjustment: The rolling guide can automatically adjust the position and angle of the guide roller according to the size and shape of the billet to ensure the stability and balance of the billet during rolling.
4. Energy saving and environmental protection: Adopt advanced lubrication system and energy-saving design to reduce the amount of lubricant used and energy consumption, and reduce the impact on the environment.
5. Easy maintenance: the rolling guide has a simple structure, easy to maintain and clean, reducing downtime and maintenance costs.
Overall, DANIELI 1000 series rolling guide is a reliable, efficient and durable equipment that can improve the production efficiency and product quality of the steel production line.
7 Common Car Maintenance Myths