Precision Mg Die Casting is Heated to semi-solid magnesium alloy materials with high speed and high pressure of metal Injection Molding, the magnesium alloy products is precise size precision castings, high density, high strength, high performance, known as the high precision magnesium alloy Die Casting. Widely used in aerospace, automotive, communications, electronics industry, semi-solid die casting is our main production process, has 101 sets of magnesium alloy semi-solid die casting machine, can provide the largest and most advanced metal processing services.
NOTE: All products are photographed in factories
just use as technology sample
Precision Mg Die Casting Precision Mg Die Casting,Industrial Parts Die Casting,Aluminium Die Casting,Products Made Die Casting,Laptop Parts Die Casting Ruizhun Precision Metal Co., Ltd. , https://www.rzjmdiecasting.com
Fault check: Remove the bottom cover of the clutch, hang the transmission into neutral, and press the clutch to the end. Then, use a screwdriver to pull the driven plate. If it is easy to turn, it means that the clutch is well separated; if it cannot be moved, the clutch is not completely separated.
Troubleshooting:
1 Check if the free travel of the clutch pedal is too large and adjust it.
2 Check whether the height of the separation lever is the same or not too low. Under the car toggle separation fork, so that the front end of the release bearing gently leaned on the end face of the separation lever, rotate the clutch one week to view, if the separation of the inner end of the lever can not contact with the separate bearing, indicating that the height of the separation lever is inconsistent , should be adjusted. If the separation lever is of the same height and the separation is still not complete, check the lever height. Distribute the levers to the same height. If they can be completely separated, they may be improperly adjusted or worn. After the release lever adjustment, the free travel of the clutch pedal must be re-adjusted.
3 If the above adjustment is normal and the separation is still incomplete, remove the clutch and check whether the driven plate is installed in the opposite direction, whether the axial movement is difficult, whether the main driven plate has warpage, whether the separation of the lever screw is loose, and whether the floating pin is Fall off.
4 For the newly riveted friction plate clutch, check if the driven plate and the friction plate are too thick. If it is too thick, add a spacer between the clutch cover and the flywheel.
5 For hydraulically-actuated clutches, in addition to the above checks, it is also necessary to check for lack of brake fluid, leaks in the piping and discharge of air in the hydraulic system. Auto Repair Home)
Detection and Elimination of the Difficulty of Checking Gears at Leakage of Liangshan Trailer Engine
Fault phenomenon: When the car engine is running at idle speed, although the clutch pedal has been stepped to the end, it is difficult to provide gear, and the transmission gear has a crash sound. After reluctantly putting on the gear, the clutch pedal has not been released and the car has been driven or turned off.