With the rise of the construction industry, the use of cranes has been increasing year by year. However, owners have been far less aware of crane safety measures and caused a tragedy of crane accidents every year. As a result, the related safety measures for cranes have also increased. The more concerned, in order for everyone to be able to understand as soon as possible, Xiao Bian specially interviewed the masters with more than five years of experience to teach them the safety measures for safe hoisting of 8-ton cranes. The following points are suggestions given by the masters, I hope everyone can adopt:

1. The first point: While the owners use the crane, it is recommended that major companies should provide an occasional knowledge and operation training to the owners, strictly control the technical level and quality of the car owners, and they must hold certificates to ensure their protection. The crane works smoothly.

2. The company must strictly supervise the management system of large-scale machinery and send professionals to check and repair cranes and large-scale vehicles from time to time to ensure safe operation of all major machinery vehicles.

3. For the specific work flow of the crane, it is best for the company to send professional personnel to combine the situation on the spot, conduct on-site command and operation of the driver, and strictly guard the technical description.

4. According to the requirements of the construction system law, the professional shall be instructed to perform the job ticket for safe construction, so as to facilitate the supervision of the on-site personnel.

5. Before hoisting the crane, it is necessary to carry out strict inspection of the hoisting point in order to ensure the safety of the hoisting point.

6. When carrying out crane hanging operations, the staff shall follow the technical operation procedures to regulate the construction.

7. The crane driver must carry out irregular inspections and maintenance of the lifting tools before use, and special personnel are responsible for registration. If problems are found, technicians shall be dispatched to repair them in time.

8. In the crane work site, the joints of the welding machine should be connected, and the line reading should not be exposed to the outside, to prevent the wire rope from coming into contact with the wire and then burn the wire rope to cause an accident.

The above is related to the introduction of safety measures for cranes. If there are other things that do not understand, you can visit our official website.

A Coordinate Measuring Machine (CMM) is a device that measures the geometry of physical objects by sensing discrete points on the surface of the object with a probe. Various types of probes are used in CMMs, including mechanical, optical, laser, and white light. Depending on the machine, the probe position may be manually controlled by an operator or it may be computer controlled. CMMs typically specify a probe's position in terms of its displacement from a reference position in a three-dimensional Cartesian coordinate system (i.e., with XYZ axes). In addition to moving the probe along the X, Y, and Z axes, many machines also allow the probe angle to be controlled to allow measurement of surfaces that would otherwise be unreachable.

Coordinate Measuring Machine

Coordinate Measuring Machine,Electronic Coordinate Measuring Machine,Optical Coordinate Measuring Machine,Three Coordinate Measuring Machine

Dongguan Jaten Instrument Co.,LTD(HK TT:Jaten Technology Co.,Ltd ​) , https://www.jatentech.com