Since the electric vehicle began to be used, it has brought convenience to people's travel. Because it is an electric relationship, it will not cause pollution to the environment, so it has been widely used. In addition to electric bicycles, there are many electric vehicles, such as electric garbage. Transporter. At present, electric garbage trucks are used in some large-scale high-grade communities, campuses, parks, and other places. Through the help of electric garbage trucks, it can save time for cleaners to transport garbage, improve work efficiency, and has many advantages. The following Xiaobian introduces you to the price and characteristics of electric garbage trucks.

Electric garbage truck price: one 2168 yuan, 16800 yuan, 46800 yuan, 22,000 yuan, 8800 yuan, etc., depends on whether it is a three-wheel electric garbage truck or four-wheel electric garbage truck, brand, size, etc. It will also have an impact on its price.

Electric garbage truck features

1, economical. There are two kinds of electric garbage trucks: charging and using a battery. No matter what kind of car is used, the cost of a car is lower than that of gasoline. The use of an electric garbage truck every day is cheap.

2, practicality. The electric garbage truck is a very practical special vehicle. The front row sits behind the back row to transport rubbish. There is a small garbage bin. The driving is simple and convenient. It can effectively help the cleaners reduce their daily workload and work difficulty.

3, convenience. The electric garbage truck is small and small, less than half the size of an ordinary car, so it does not occupy land. It can be walked on any ground and its operation and operation are very simple.

4, a wide range of uses. Electric garbage trucks can be used anywhere that needs garbage transportation, such as residential areas, amusement parks, scenic spots, schools, islands, and so on.

After the introduction, you have a certain understanding of the price and characteristics of electric garbage trucks. The electric waste removal truck is widely used and it is energy-saving and environmentally friendly. We believe that it will be used more widely in the future. However, it is reminded that electric garbage trucks cannot be used on highways and cannot be used as normal automobile operations.

 Forklift parts investment casting is one branch of Alloy Steel Precision Casting, which is widely used in forklift markets. Precision casting of forklift parts adopts lost wax casting, also called investment casting.

 In wax pattern process,we mix stearic acid and paraffin wax. In wax pattern making, as you know, it is better than polyethylene, and the wax deformation is small. In dipping slurry process,most of the suppliers adopt water glass technics in domestic area,but we adopt compound technics or silica sol technics.

 In shell making,we adopt automatic sand-covering production line, which was invented under the guidance of our general manager.The indoor temperature was controlled by air-conditions,keeping the temperature at  24℃±1℃, which can make the castings much more stable,the internal tissues much more well-proportioned.

 In dewaxing process,about 95% of the castings suppliers adopt the original water dewaxing technics,but we using the advanced steam dewaxing technics,which we are very proud of.This can effectively avoid the air-hole and sand-hole,making the casting look much nicer.

 In smelt process,we use middle frequency furnace,avoiding the emergence of the oxide; in molten steel control part,we use Germany-imported direct reading spectrometer machine,assuring its quality before the molten steel out of the furnace.During this process we use ERP production and management software to get the feedback information.

 In shell-knock out process,we have special machines,which can decrease the hitting and knocking, easily made by manual shell knocking out.

 In shot-blasting process,we have crawler-type and hanging shot-blasting machine,with steel shot 0.5-0.8,making the products smooth.Of course,if the customer wants it look much nicer,we also can carry out sand-blast treatment.

 In heat treatment process,we use electric furnace,and adopt double-temperature control in order to heat the products equally.As a result, the products will have great metallurgical structure.

 Our tolerance can reach at the grade of 5-7 according to our country`s tolerance standard.

  In machining process,we have 12 CNC machining centers and some other machines, so we can make further machining if the customers need.

  Our forklift parts casting has quality assurance in accordance with ISO9001: 2008, strict material inspection and exact dimension control, with 100% quality control. OEM order is welcome. The parts can be made completely based on your specifications such as drawing, design, sample etc.

Investment Casting for Forklift Parts

Forklift Parts Investment Casting,Investment Casting for Forklift Parts,Forklift Parts Precision Castings,Precision Casting Parts

Wei fang junlong precision casting Co.,Ltd , https://www.junlongcasting.com