1. Copper wires are fed into the crusher, where they are broken down and the plastic sheath is separated from the copper. The size of the crushed material depends on the mesh size of the sieve; larger mesh sizes produce longer pieces with higher output. The mesh should be selected based on the type of material being processed.
2. The crushed mixture of copper granules and plastic pieces is transported to the separator by a conveyor. During this process, dust and lightweight plastic fragments (such as fibers, ropes, or tapes) are collected by an air blower. The blower connects to a dust collector that uses a dust bag to prevent environmental pollution. This bag collects dust and some light plastics, which can be emptied when full.
3. The vibrating separator is used to separate plastic pieces from copper granules. Based on differences in physical properties and specific gravity, the materials are separated through aerodynamic and frictional forces. By adjusting the speed and amplitude of the conveyor, heavier copper granules move to the bottom and upwards, while lighter plastic pieces move to the top and downwards, eventually being discharged through different outlets.
4. All components are installed on a base frame to form a complete system. The machine is pre-adjusted before shipping, so customers only need to connect it to the power supply.

Granulator for Waste Copper Cable Technical Parameters: 

ModelÂ	Recycling capacity	Processed wire dia.	Total power	Voltage	DimensionÂ	WeightÂ
QJF-400-1	80-100kg/h	    0.3-20mm	11.92KW	    Adjustable	1.5*1.5*1.9m	750kg
QJF-400	200-300kg/h		23.12KW		2.7*1.9*2.3m	1200kg
QJF-600A	300-400kg/h		48.36KW		4*1.85*2.4m	3400kg
QJF-600	300-400kg/h		52.36KW		4.3*1.95*2.4m	3400kg
QJF-800	600-700kg/h	0.1-40mm	75.4KW		9.1*2.3*3.54m	8000kg

   
Granulator for Waste Copper Cable Different Models:  




FAQ 
 1. Is there a quick-wear part on the machine? 
The main wear parts are blades and screens, which have a service life of over 2 years. We also provide a blade sharpening machine for maintenance.
 2. What is the maximum continuous working time for the recycling machine?   
Normally 10 hours per day. 
 3. Is the machine easy to operate? How many workers are needed to operate it? 
We have designed a precise but simple control system for the machine.
For a single recycling machine, only one worker is required.
For a complete recycling line, two workers are required.

Contact Information:  
Attn: Tina Ge 
Mobile:+8615981925357 
 
 

Parallel Twin Screw Extruder

The series twin screw stem extruder is soecially suitable for processing soft and hard PVC raw material. Besides, powder can be extruded and shaped. The machine has different types of screw stems to produce pressing pipe, hot-water pipe, corrugated pipe, hard PVC sheet, HDPE pipe, LDPE pipe, PP pipe, soft PVC floor, cable material, ABS, PVC plate and others.

Parallel Twin Screw Extruder,Parallel Twin Screw,Parallel Twin Screw Extrusion Machine,Twin Screw Extrusion Machine

KonRun Intelligent Machinery(Ningbo) Co., Ltd. , https://www.konrunmachine.com