Introduction to GENT industrial water chiller The classification of industrial water chiller is based on the application fields of water chiller. Applying water chiller to industrial field is not only feasible, but also indispensable in many key processes. Its application can cover everything from traditional manufacturing to high-tech products, so we have divided the category of industrial water chiller. Applicable scenarios of chillers in industrial field 1. Manufacturing industry Water chiller can be used in plastic processing, metal processing, and electroplating/surface treatment. 2. Food and beverage industry Chillers can be used in post-pasteurization cooling and dairy/beer fermentation and other production processes. 3. Other industrial scenarios Cool water chiller can also be used for centralized cooling in scenarios such as laboratory equipment, data centers, and central Air Conditioning systems. Core advantages of industrial chillers Industrial chillers hvac can achieve efficient temperature control, adapt to complex environments, and have both stability and durability, so they are suitable for industrial scenarios. Comparison with other cooling solutions 1. Cooling tower: Some Water Chiller System with cooling tower is suitable for scenes with large flow and does not have strict requirements on water temperature, but it occupies a large area and the performance of the unit depends on the ambient humidity. 2. Air conditioning system: The air conditioning system is mainly used for indoor space cooling and cannot meet the high-precision cooling needs of industrial equipment. 3. Industrial water cooler: It is the first choice for process cooling because it is efficient, precise and flexible. Therefore, the chiller air conditioner is suitable for use in the industrial field. Users who have cooling water and cooling needs in the industrial field can consider this kind of unit. Water Chiller,Industrial Water Cooler,Cool Water Chiller,Chillers Hvac,Chiller Air Conditioner GUANGZHOU GENT NEW ENERGY TECHNOLOGY CO., LTD , https://www.gentgz.com
Â
Engine Model
Â
JTA2160-G1
SpeedÂ
rpm
1500
FrequencyÂ
Hz
50
Rating Output
Â
Â
Continuous OutputÂ
kW
684
BMEP for Continuous Output
bar
15.47
Fan Reduction
kW
5.5
Single Fan Reduction
kW
5.0
Fan Quantity
rpm
1460
Basic Performance Datasheet
Â
Â
Aspiration Type
Â
Turbocharger air-water aftercooler
Configuration
Â
V
No. of Cylinders
Â
8
DisplacementÂ
l
35.4
BoreÂ
mm
170
StrokeÂ
mm
195
Compression Ratio
Â
12:1
Number of Flywheel TeethÂ
Â
218
Flywheel House Size
Â
SAE00-18
Cooling System
Â
Â
Coolant Capacity for EngineÂ
l
70
Max. permissible Temperature of Cylinder Inlet
°C
80
Max. permissible Temperature of Cylinder Outlet
°C
90
Max. Coolant Warning Temperature Â
°C
93
Max. Coolant Shutdown Temperature Â
°C
97
Thermostat Open TemperatureÂ
°C
71
Radiator Cooling Flow Â
m³/min
900
Energy Balance
Â
Â
Heat dissipation (engine radiator)± 8 %
kW
351
Heat dissipation (CAC)± 8 %
kW
60
Heat dissipation (Exhaust cooled to 120°C)± 8 %
kW
346
Gas Consumption + 5 %
kW
1683
Electrical EfficiencyÂ
Â
38.03%
Mechanical EfficiencyÂ
Â
40.67%
Thermal Efficiency
Â
41.41%
Total Efficiency
Â
82.09%
Engine Output at genset prime output
kW
684
Fuel Consumption at 100% of genset prime output+ 5 %
Nm3/hr
168.30
Intake & Exhaust System(On Continuous Output)
Â
Â
Combustion Air ConsumptionÂ
m³/min
66.53
Max. Intake RestrictionÂ
mbar
5.0
Gas Inlet Pressure Value
mbar
20-200
Gas Inlet PressureÂ
Â
± 10 %
Cylinder Max. Exhaust Temperature (before turbo)
°C
630
Max. Exhaust Temperature (after turbo)
°C
460
Min. Exhaust Back Pressure
mbar
30.0
Max. Exhaust Back Pressure
mbar
50.0
Exhaust Gas Flow Â
m³/min
167.53
Exhaust Flange DiameterÂ
mm
1*250
Emissions NOx
mg/Nm3
< 500
Engine Dimension
Â
Â
LengthÂ
mm
2596
WidthÂ
mm
1459
HeightÂ
mm
1820
Engine Dry Weight w/o Cooling System
kg
3500
1. All engine parameters are in accordance with ISO3046, ISO8528.
2. All engine parameters are based on 25° C / 100kPa environment condition.
3. Application for Power Generation, Marine, Pump Driving, CHP power plant.
Applied gas:
Natural Gas, Biogas, City Sewage Gas, Landfill gas, Oil gas, farm biogas, Coal mine gas, etc
Acceptable fuel gas pressure: 5~12kPa
CH4 content: For natural gas≥ 85% CH4, content: For biogas≥ 40%
Gas heat value≥ 5500kcal/Nm3 (23MJ/Nm3 ). Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel (Heat value<5500kcal/Nm3, it will lower the power efficiency.
Gas doesn't include free water or free materials (the size of impurities should be less than 5μ M. )
H2S content≤ 200mg/Nm³
NH3 content≤ 20mg/Nm³
Impurities content≤ 30mg/Nm³ ; Size≤ 5μ M
Water content≤ 40g/Nm³ , no free water.
Acceptable working conditions:
Ambient temperature: -10° C~+40° C
(antifreeze or preheater needed for below 0° C)
Relative humidity: <90%(20° C)
Altitude: ≤ 1000m
Normal working conditions:
Genset can run at rated power on the conditions:
Atmospheric Pressure: 100kPa, Ambient Temp: 20° C, Relative Humidity: 30%.
Standard scope of supply:
1, Gas Engine
2, AC Generator
3, Common Frame
4, Control Panel
5, Ignition System: Ignition Controller, Ignition Coils, Output harness, Pickup magnetic, Trigger disc, PolyMot high tension lead, Spark Plug
6, Detonation Controller System: DetCon20 control unit, Detonation sensor, Cable & knock sensor
7, Electronic Speed Controller System: Integrated Throttle body, Vari-Step stepper motor card, Harness VariFuel, Electronic speed controller - ECON-4, pickup magnetic
8, Gas Mixer System: VariFuel air/fuel ratio mixer, VF Flange, VariStep stepper motor card, Harness VariFuel, VariFuel2 flow body
9. Emission Control System: EmCon5 control unit, EmCon5 sensor harness, knock sensor
10, Valve: Gas Pressure Valve, Solenoid Valve, Cutoff Valve
11, Exhaust Bellows & Muffler
12, Radiator for optional
Warranty:
All equipment is guaranteed for a period of 1000 hours running or 18 months from the date when the generator set has been delivered from the factory.
Â
The Googol JTA2160G1 generator is a powerful and efficient solution designed for various applications including power generation, marine use, pump driving, and combined heat and power (CHP) systems. This gas engine operates at 684 kW with a frequency of 50 Hz, delivering reliable performance in both water-cooled and air-cooled configurations. It is suitable for a wide range of fuels such as natural gas, biogas, and other alternative gases, making it an environmentally friendly option.
Key features include:
- **Engine Model**: JTA2160-G1
- **Speed**: 1500 rpm
- **Continuous Output**: 684 kW
- **Cooling System**: Water-cooled, with a coolant capacity of 70 liters
- **Efficiency**: Electrical efficiency of 38.03%, mechanical efficiency of 40.67%, and total efficiency of 82.09%
- **Emissions**: NOx emissions below 500 mg/Nm³ at full load
- **Dimensions**: 2596 mm x 1459 mm x 1820 mm
- **Weight**: 3500 kg without cooling system
This generator is ideal for industrial and commercial applications where consistent and clean energy is essential. It comes with a comprehensive warranty of 1 year or 1200 operating hours, ensuring peace of mind for users. The product includes standard components such as the gas engine, AC generator, common frame, control panel, and more, all meeting international standards like ISO3046 and ISO8528. With its advanced technology and robust design, the Googol JTA2160G1 is a top choice for those seeking reliable and efficient power solutions.
Googol Generator Use 684kw 50Hz AC Three Phase Gas Engine
Model NO.: JTA2160G1
Cooling Way: Water Cooled, Air Cooled, CHP, Cchp
Power Range: 684kw
Gas Methane: Biogas CH4:60%, CO2:40%; Natural Gas
Certificates: ISO, CE, BV, GOST, SGS, etc.
Warranty: 1 Year or 1200 Working Hours
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Gas Train: Ball Valve, Gas Filter, Gas Regulator, Gas Control
Nox Emission: 100% Load Below 500mg/Nm3
Trademark: Googol
Transport Package: Standard
Specification: ISO3046, ISO8528
Origin: China
HS Code: 8502120000
Googol Generator Use 684kW 50Hz AC Three Phase Gas Engine Â