Ethylene Decomposition Furnace Anchor There are many types of anchors, and high-holding anchors are commonly used on drilling platforms, as shown in Figure 1. The main feature of this anchor is that its gripping force can only be guaranteed when the pulling force is in the horizontal direction. If the pulling force has a vertical component, the gripping force is reduced, and the anchor claw will be pulled out of the ground. Experiments show that the grip force starts to decrease when the anchor handle is turned up by 6°, and the grip force decreases significantly when the anchor handle is turned up by 12°. Therefore, when mooring, the lower end of the anchor chain must be tangent to the seabed, otherwise there is a danger of running the anchor. Lifting the anchor is to use this feature, pull the anchor chain upward to lift the anchor handle, the anchor loses its grip, and finally breaks out of the ground. Ethylene Decomposition Furnace Anchor,Refractory Casting Anchors,Anchors For Pre Heater,304 Stainless Steel Refractory Anchor Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.com
New Video Shows Bulk Liquid Tank Truck Loading Process
Bulk liquid transportation is a highly intricate task that demands meticulous planning, adherence to strict safety protocols, and an unwavering focus on precision. At Bulk Connection, we recognize that ensuring the secure loading of bulk liquid tankers is critical for delivering materials safely to their intended destinations. In this post, we’ll outline the key stages involved in loading a tanker truck and share our new video, which provides a detailed walkthrough of each step.
---
Loading a bulk liquid tanker is no small feat. It’s a process that requires careful orchestration and a keen eye for detail. Let’s dive into the main steps involved:
### Step 1: Arrival and Preliminary Checks
The moment the driver arrives, the loading process kicks off with a series of checks. These include verifying all necessary paperwork and inspecting the tanker to ensure everything aligns with regulatory standards. These preliminary checks are crucial for maintaining safety and compliance throughout the operation.
### Step 2: Prioritizing Safety
Safety is our top priority at Bulk Connection. Before connecting the tanker to the facility's loading equipment, multiple safety measures are implemented. This involves grounding the vehicle, placing tire chocks, and equipping the team with appropriate safety gear. These precautions are designed to mitigate risks and foster a secure working environment during the loading process.
Check out the video below to see these steps in action:
### Step 3: Equipment Connection
With safety measures in place, the next step is connecting the tanker to the facility’s discharge system. Our team uses a tailored approach to select the appropriate adapters and hoses, ensuring a tight and secure connection for each load. This level of attention to detail is vital for preventing leaks and preserving the integrity of the materials being transported.
### Step 4: Loading and Quality Assurance
Once everything is connected, the loading process begins. The material is pumped from the storage tank into the tanker while being closely monitored. Early in the process, we conduct quality checks to confirm that the material meets all required standards. This step is essential for maintaining consistency and reliability.
### Step 5: Finalizing the Load
After the loading is complete, further steps are taken to prepare the tanker for transit. This includes sealing the truck’s valves and dome, implementing security measures to safeguard the product from contamination until it reaches its final destination. Finally, the driver is handed over essential documents, such as the Bill of Lading, before departure.
---
At Bulk Connection, we take pride in delivering safe and efficient bulk liquid transport services. Our team combines extensive industry knowledge with stringent safety protocols to offer dependable, high-quality service to every client. Watch our video to witness these processes in motion, and don’t hesitate to reach out to Bulk Connection to learn more about how we can cater to your specific bulk liquid transport needs with care and precision.
There’s always more to discover when it comes to optimizing bulk liquid transportation. If you have any questions or need assistance, feel free to get in touch—we’re here to help!