In order to extend the service life of the car, it is necessary to carry out maintenance on its own car at regular intervals. The most important thing for maintaining the car is to maintain the engine of the car. Many riders don't know how to maintain the engine of their car. Here are some ways for the car owners to organize some of the turbocharged engines.

Main measures to extend the life of turbochargers

(1) Strictly implement the basic principles of “three-filter” and “three-clean” lubricants to ensure that the lubricant is clean.

(2) Strictly implement equipment maintenance procedures. Clean the air filter every 100150h of the engine, replace the air filter element if necessary, and replace or clean the oil filter element; check the oil quality of the engine every 150200h, and replace the oil if necessary.

(3) Strictly implement the supercharger installation procedure. Installation regulations: clean the oil pan before installation, replace the main oil filter oil filter, add the oil of the specified brand; plug the oil into the oil hole with a screw plug, and oil the turbine rotor shaft through the oil return hole, Extend the turbine rotor shaft by hand into the turbocharger exhaust port until the oil return hole has oil spillage; remove the plug, connect, secure all the connecting bolts and tighten the clamp screws.

(4) Strictly implement the diesel engine operating procedures. When the diesel engine starts, it will run for 35 minutes at an idle speed. After the floating bearing reaches the working lubrication state, the load can be added. Before the normal shutdown, the diesel engine should gradually reduce the load, and after 35 minutes of idle speed operation, the turbine temperature can be gradually reduced before it can stop. The number of emergency shutdowns should be minimized, while avoiding excessive throttle and engine idling during start-up or shutdown.

(5) Strictly check equipment according to the standard. Check whether the connecting bolts and clamp screws on the supercharger are loose before and after the operation, and eliminate the leakage and oil leakage in time; often clean the oil and dust of the supercharger to find out whether the supercharger leaks or leaks in time. Check the air filter and clean the filter; check if the lubricant is normal and replace it.

In addition, intensive training and improved driver skills are also key to extending the life of the supercharger. The high temperature and high speed cause the supercharger to operate in a harsh environment and the lubrication is difficult. Therefore, the driver is required to master the hard operation skills and use the supercharger well.

In terms of productivity and economy, proper and standardized operation and proper daily maintenance are important ways to extend the life of the turbocharger.

The above is some of the related maintenance knowledge about the car turbocharged engine that Xiaobian has compiled for the riders. I hope that the riders can master it.

Most kinds of plastics could be processed by plastic pyrolysis machines.

the main plastics will be PP PE with high oil output

PVC or PET is not suitable for pyrolysis machines 

there will be Cl generated from its process

when met with water, there will be HCL, 

it is harmful to reactor and all the whole plastic pyrolysis system.

the main process is that by heating the reactor directly, plastics will be pyrolysised into oil gas;

condensers or cooling pipes will cool the gas down into liquid oil with the help of recycling water;

then the rest gas which could not be cooled down into liquid oil will be recycled into reactor heating system; after oil gas coming out completely, stop heating the reactor, and cool down reactor below 70 degrees; then can open the door and discharge carbon black automatically...

there are models with capacities from 5tons to 20tons per batch

LN-2200-6000 capacity of 5-6ton 

LN-2200-6600 capacity of 7-8ton 

LN-2200-8000 capacity of 9-10ton 

LN-2600-6600 capacity of 10-12ton 

LN-2600-8000 capacity of 12-14ton 

LN-2800-6000 capacity of 10-12ton 

LN-2800-6600 capacity of 12-14ton 

LN-2800-8000 capacity of 15-20ton 

if cut into smaller pieces, it could process more.

the whole process includes feeding plastics into pyrolysis reactor;

 then heating the reactor and oil gas coming out for some time;

 cool down the reactor; at last open the door and discharge the carbon blacks...

Waste Plastic Pyrolysis Machine

Waste Plastic Pyrolysis Machine,Plastic Pyrolysis Machine,Plastics Pyrolysis Equipment,Scrap Plastic Pyrolysis Machine

Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com