Http://flexible rubber joint pipeline construction is necessary to put it in a natural condition not to artificially deform the merchandise at the time of the equipment. When the pipeline medium is resistant to acid, alkali, oil, high temperature and other special data, it should use a joint that is one step higher than the working pressure of the pipeline. Gongyi City Wanquan Pipeline Equipment Factory--Global Manufacturing Network rubber joint suppliers can be wound around the rubber joints. The normal application medium is the temperature of 0-60 °C ordinary water special media such as oil, acid and alkali, high temperature and other corrosive and strong texture Under the circumstances, the rubber joints corresponding to the special resistance data should not be used blindly or universally. The flange connecting the rubber joints shall be a valve flange or a flange conforming to GB/T 915.1 (RF). GJS(X)-A Type JGD/KXT Various types of rubber joints When the equipment is to be used, the ball must be reinforced at both ends. The outstanding part of the steel wire rope should be locked in the flange groove to prevent the pressure bearing ball from pulling off the flange. Tighten the symmetric hex bolts or the four strips to ensure that the spheres and flanges are fully seated. Wanquan compensator