Quantum has extensive experience in the correct selection and design of screw conveyors, screw dischargers, hopper unloading and screw metering systems. The above list is typical of the type of equipment we have supplied to a variety of industries for varying applications. Whether your process and application requires mixing during conveying, dewatering, batch metering interlocked to weigh system or conventional transfer conveying we have the experience and standard equipment to ensure you have a reliable trouble free installation.
QUANTUM designs and supplies a complete range of Screw Conveyors.
These types include:
• Conveying and transfer conveyors:
• Horizontal Screw conveyors
• Storage Hopper Discharging & Live Bottom Bin Discharging systems
• Hopper Discharge
• Dosing and metering screw dischargers
• Twin Shafted Screw Conveyors
• Dewatering and compacting screw conveyors
• Batch metering screw feeders with self-emptying storage hoppers.
• Shaftless Screw Conveyors (Auger Covneyors)
Quantum have specialized screw conveying systems installed in chemical, mineral as well as the food and beverage industries. Our designs cater for stainless steel, mild steel with liners and special steel for abrasive materials, through to fully polished, sanitary clean down applications requiring full clean out and knock down construction. Materials handled can be micro powder to granular and lumps. The selection and type of conveyor recommended is critically dependent on the material to be conveyed.
Conveying and Transfer Conveyors:
Quantum manufacture a standard range of screw conveyors incorporating intermediate center bearings or center less screw conveying for difficult sticky materials. Length of conveyors and size of conveyor depends on capacity and material characteristics.
Inclined and vertical conveying:
Quantum have designed and installed both vertical and inclined Screw Conveyor systems. It is recommended to design all incline conveyors without using an intermediate bearing, if possible and to keep incline to less than 75o for optimum efficiency. Whether your application requires a tubular inclined conveyor or trough conveyor, Quantum will select the most suitable conveyor for your application that is suited to the material characteristics, environment, length conveyed and your specific needs such as clean down and residue. Efficiency of vertical conveyors can be as little as 10% and generally require specific design considerations; the nature of material and feed method. Our engineers can assist with the best and most suited conveyor for your needs.
Horizontal transfer conveyors
A single conveyor can incorporate several hanger bearings over length in access of 100m. However length is very much dependent on the nature and characteristics of the material and the conveying capacity. Some materials cannot be successfully conveyed using any hanger bearings, whilst other materials will accommodate several hanger bearings trouble free. We has a general rule of maximum conveyor percentage full by volume be no more than 40% when using hanger bearings with no more that 1mm/m deflection of center pipe. Quantum design all conveyors for full load start up with much consideration given to conveyor speed to eliminate excessive wear. All our conveyors are designed with gland seal packing to protect spherical bearings.
Hopper and Live Bottom Bin dischargers
Our hopper and Bin dischargers are used when non free flowing materials need to be discharged from hoppers or storage bins. Size and quantity of screws depend on the hopper configuration and the material characteristics. Using multiple screw dischargers can increase volume of hoppers whilst ensuring a positive discharge of material at a controlled out feed. Each screw can be independently powered or interlocked with one or two drive assemblies depending on loading and capacity of the system.
Generally installed with slow speed counter rotating screw flights that can be over locked for maximum discharging capabilities they are variable pitch or variable flight diameters to ensure even material discharge across hopper.
Heating and Cooling Jackets
All Quantum Screw Conveyors can be fitted with heating and cooling jackets utilizing steam, thermal liquids, refrigerant, water or brine. Heating or cooling can be designed by our process engineers who will recommend the most suitable size and type of conveyor for your production and needs.
Clean Design
Quantum is familiar with the specific needs of the food and beverage industries. All our Screw Conveyors can be fitted with CIP spray balls and manifolds, with quick knockdown in mind to ensure complete clean-down where required. Screw Conveyors can be constructed from mild steel, 304 or 316 stainless steel, depending on the material being conveyed. Surface finish will be provided to suit specific requirements. All components such as IP ratings of electric motors and switches are selected with these specific requirements in mind to ensure compatibility with your operating procedures.
After sales support
Quantum can provide a customized service contract using experienced technicians with many years` experience in servicing and troubleshooting Screw Conveyors in all states. This service ensures your equipment is functioning to its optimum capabilities and reduces down time due to parts replacement and potential damage. Our technicians have standard customer maintenance, checking and reporting procedures.
Screw Conveyor Screw Conveyor,Tubular Screw Conveyor,Single Shaft Screw Conveyor,Twin Shafted Auger Conveyor Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.quantum-sino.com
Wet Drum Permanent Magnetic Separator is suitable for Mine, Coal preparation plant etc. use weak wet magnetic field to sort out the strong magnetic ore, or eliminating the strong magnetic minerals mixed in nonmagnetic minerals. The magnetic field of CTS(N,B) wet drum permanent magnetic separators divide into rotary and fixed. The fixed one is mainly use in weak magnetic field to separate the fine particle strong magnetic materials, or eliminating the strong magnetic materials in the nonmagnetic ores.
When the ore pulp entering magnetic field area, the ferromagnetic materials are sucked up on the surface of the drum, weak magnetic substance and nonmagnetic minerals are washed away by water, the absorbed magnetic minerals on the surface of drum are rotated with the drum and taken out of magnetic field area .The rotary one is suitable to dry separate the fine particle strong magnetic ore, because of speedy rotation, the magnetic particle rolling more times than other magnetic separator, which is effectively destroy the reunite of magnetic and arise the high-grade ore, the ore are divide into magnetic and nonmagnetic after separation, and discharge from the own road. This machine is suitable for the roughing and cleaning of particle size in 6-0mm size.
This machine has three kinds of tank: CTB, CTS and CTN, the same kind of drum could match those three tanks, to suitable different separation work and different requirement:
CTS is suitable for the roughing and cleaning of particle size in 6-0mm;
CTN is suitable for the cleaning and scavenging of fine particle size in 0.6-0mm , and it is often applied to recycle heavy medium in coal;
CTB is suitable for the roughing and cleaning of ores in size of 0.5-0mm, especially suitable for the cleaning of ores in size of 0.15-0mm.
This wet drum permanent magnetic separator can continuously feeding ores and discharge ores ,with large magnetic field intensity, high magnetic field gradient, big working clearance, higher processing ability and little magnetic flux leakage, low energy consumption, fine beneficiating results, simple structure and easy to maintain.
Technical Specifications
Â
Model
Shell szie
(Shell diameter×Shell length)
mmMagnetic induction on shell surface mT
Capacity
Power
KwShell rotation  speed r/min
Weight Kg
Magnetic pole
geometric centreAverage
Max. magnetic strength
T/h
m 3/h
CTS(N.B)-46
400×600
Â
130
160
1~3
5
1.1
45
600
CTS(N.B)-66
600×600
Â
145
170
5~10
16
1.1
40
705
CTS(N.B)-69
600×900
Â
145
170
8~15
24
1.1
40
830
CTS(N.B)-612
600×1200
Â
145
170
10~20
32
2.2
40
990
CTS(N.B)-618
600×1800
Â
145
170
15~30
48
2.2
40
1330
CTS(N.B)-712
750×1200
120
155
180
15~30
48
3
35
1500
CTS(N.B)-718
750×1800
120
155
180
20~45
72
3
35
2100
CTS(N.B)-918
900×1800
148
165
190
25~55
90
4
28
2900
CTS(N.B)-924
900×2400
148
165
190
35~70
110
4
28
3500
CTS(N.B)-1018
1050×1800
148
165
190
40~75
120
5.5
22
4000
CTS(N.B)-1021
1050×2100
160
240
280
45~88
140
5.5
22
4500
CTS(N.B)-1024
1050×2400
160
240
280
52~100
160
5.5
22
5000
CTS(N.B)-1030
1050×3000
160
240
280
65~125
200
7.5
22
6200
CTS(N.B)-1218
1200×1800
160
240
280
47~90
140
5.5
19
5800
CTS(N.B)-1224
1200×2400
160
240
300
82~120
192
7.5
19
6200
CTS(N.B)-1230
1200×3000
160
240
280
80~150
240
7.5
19
7200
CTS(N.B)-1530
1500×3000
180
240
300
90~170
270
11
14
8100
CTS(N.B)-1540
1500×4000
180
240
300
115~220
350
11
14
9300
FAQ
Weclome to visiting our factory to check the machines or send to my email as follow information.
1.Capacity of project?
2.Particle size of original ore?
3.What kind of mineral ores ?
4.Kindly let me know the electric power of your country , here we are 380V 50HZ 3PHASE
We will suggest you the best type and good machines for respect customers.
Why choose our company machine?
1. We are factory (NOT Dealer)
All machinery from Well-tech international equipment Mining Machinery Manufactory are made by ourselves, No trade company make
Commission(many trade companies do not produce the machinery),the lower price with the same goods, good quality, after service can be assured (after service of trade companies will get help from factory).
So please buy from factory
2. We will do our best to satisfy every customer's needs
Producing high-quality and reliable machines is our first priority, because we know that our success depends entirely on the satisfaction of our customers. We never give-up quality to save cost.
3. Training &Â service
Training is FREE to every customer. Whenever you need us, for installation, maintenance, or proper use of our company machines, we will be right there for you. In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
4. If you are new for this business, IÂ will help you
Many thanks for your trust; we can provide you with the pre-services of design scheme for complete production lines, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments, drilling rig, Loader, trucks, excavators and so on
5. We will recommend a suitable type for you and send you a best quotation
Our Services
1) Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.
2) Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export
3) After-sales service: We sent engineer to the scene to guide installation, debugging and training operators.
For more details, please send me inquiry below, we will reply you within in 24hour,or you can call me, my cell is +86 183 7987 3189.Mily
Â
Thanks for your time.
Â
Descriptions
Wet Drum Permanent Magnetic Separator is suitable for Mine, Coal preparation plant etc. use weak wet magnetic field to sort out the strong magnetic ore, or eliminating the strong magnetic minerals mixed in nonmagnetic minerals. The magnetic field of CTS(N,B) wet drum permanent magnetic separators divide into rotary and fixed. The fixed one is mainly use in weak magnetic field to separate the fine particle strong magnetic materials, or eliminating the strong magnetic materials in the nonmagnetic ores.
When the ore pulp entering magnetic field area, the ferromagnetic materials are sucked up on the surface of the drum, weak magnetic substance and nonmagnetic minerals are washed away by water, the absorbed magnetic minerals on the surface of drum are rotated with the drum and taken out of magnetic field area .The rotary one is suitable to dry separate the fine particle strong magnetic ore, because of speedy rotation, the magnetic particle rolling more times than other magnetic separator, which is effectively destroy the reunite of magnetic and arise the high-grade ore, the ore are divide into magnetic and nonmagnetic after separation, and discharge from the own road. This machine is suitable for the roughing and cleaning of particle size in 6-0mm size.
This machine has three kinds of tank: CTB, CTS and CTN, the same kind of drum could match those three tanks, to suitable different separation work and different requirement:
CTS is suitable for the roughing and cleaning of particle size in 6-0mm;
CTN is suitable for the cleaning and scavenging of fine particle size in 0.6-0mm , and it is often applied to recycle heavy medium in coal;
CTB is suitable for the roughing and cleaning of ores in size of 0.5-0mm, especially suitable for the cleaning of ores in size of 0.15-0mm.
This wet drum permanent magnetic separator can continuously feeding ores and discharge ores ,with large magnetic field intensity, high magnetic field gradient, big working clearance, higher processing ability and little magnetic flux leakage, low energy consumption, fine beneficiating results, simple structure and easy to maintain.
Technical Specifications
Â
Model
Shell szie
(Shell diameter×Shell length)
mmMagnetic induction on shell surface mT
Capacity
Power
KwShell rotation  speed r/min
Weight Kg
Magnetic pole
geometric centreAverage
Max. magnetic strength
T/h
m 3/h
CTS(N.B)-46
400×600
Â
130
160
1~3
5
1.1
45
600
CTS(N.B)-66
600×600
Â
145
170
5~10
16
1.1
40
705
CTS(N.B)-69
600×900
Â
145
170
8~15
24
1.1
40
830
CTS(N.B)-612
600×1200
Â
145
170
10~20
32
2.2
40
990
CTS(N.B)-618
600×1800
Â
145
170
15~30
48
2.2
40
1330
CTS(N.B)-712
750×1200
120
155
180
15~30
48
3
35
1500
CTS(N.B)-718
750×1800
120
155
180
20~45
72
3
35
2100
CTS(N.B)-918
900×1800
148
165
190
25~55
90
4
28
2900
CTS(N.B)-924
900×2400
148
165
190
35~70
110
4
28
3500
CTS(N.B)-1018
1050×1800
148
165
190
40~75
120
5.5
22
4000
CTS(N.B)-1021
1050×2100
160
240
280
45~88
140
5.5
22
4500
CTS(N.B)-1024
1050×2400
160
240
280
52~100
160
5.5
22
5000
CTS(N.B)-1030
1050×3000
160
240
280
65~125
200
7.5
22
6200
CTS(N.B)-1218
1200×1800
160
240
280
47~90
140
5.5
19
5800
CTS(N.B)-1224
1200×2400
160
240
300
82~120
192
7.5
19
6200
CTS(N.B)-1230
1200×3000
160
240
280
80~150
240
7.5
19
7200
CTS(N.B)-1530
1500×3000
180
240
300
90~170
270
11
14
8100
CTS(N.B)-1540
1500×4000
180
240
300
115~220
350
11
14
9300
FAQ
Weclome to visiting our factory to check the machines or send to my email as follow information.
1.Capacity of project?
2.Particle size of original ore?
3.What kind of mineral ores ?
4.Kindly let me know the electric power of your country , here we are 380V 50HZ 3PHASE
We will suggest you the best type and good machines for respect customers.
Why choose our company machine?
1. We are factory (NOT Dealer)
All machinery from Well-tech international equipment Mining Machinery Manufactory are made by ourselves, No trade company make
Commission(many trade companies do not produce the machinery),the lower price with the same goods, good quality, after service can be assured (after service of trade companies will get help from factory).
So please buy from factory
2. We will do our best to satisfy every customer's needs
Producing high-quality and reliable machines is our first priority, because we know that our success depends entirely on the satisfaction of our customers. We never give-up quality to save cost.
3. Training &Â service
Training is FREE to every customer. Whenever you need us, for installation, maintenance, or proper use of our company machines, we will be right there for you. In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
4. If you are new for this business, IÂ will help you
Many thanks for your trust; we can provide you with the pre-services of design scheme for complete production lines, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments, drilling rig, Loader, trucks, excavators and so on
5. We will recommend a suitable type for you and send you a best quotation
Our Services
1) Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.
2) Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export
3) After-sales service: We sent engineer to the scene to guide installation, debugging and training operators.
For more details, please send me inquiry below, we will reply you within in 24hour,or you can call me, my cell is +86 183 7987 3189.Mily
Â
Thanks for your time.
Â
Wet Drum Permament Magnetic Separator for Mining Equipment
Model NO.: CTS/CTN/CTB
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Blue
Customized: Customized
Condition: New
Application: Mine, Coal Preparation Plant
Shell Size: Min:400*600mm, Max:1500*4000mm
Max Magnetic Strength: Min:160, Max:300
Testing: Supply
Ore Analyse: Supply
Flowchart: Supply
Installation: Supply
Delivery Time: 30 Days After The Down Payment
Trademark: Gandong
Transport Package: Standard Export Packing
Specification: depent on model
Origin: Jiangxi China
HS Code: 84741000
Model NO.: CTS/CTN/CTB
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Blue
Customized: Customized
Condition: New
Application: Mine, Coal Preparation Plant
Shell Size: Min:400*600mm, Max:1500*4000mm
Max Magnetic Strength: Min:160, Max:300
Testing: Supply
Ore Analyse: Supply
Flowchart: Supply
Installation: Supply
Delivery Time: 30 Days After The Down Payment
Trademark: Gandong
Transport Package: Standard Export Packing
Specification: depent on model
Origin: Jiangxi China
HS Code: 84741000
Descriptions