our screw and barrel can be used in the injection molding machine, single screw extruder, counter-rotating double screw extruder, co-rotating double screw extruder, planetary screw extruder, rubber extruder and etc.
Buyers are welcome to visit, understand, and cooperate. We will provide you with the best service. Screw And Barrel For Rubber,Barrel Bolt Screw,Barrel And Screw,Rubber Extruder Screw And Barrel ZHOUSHAN JINTANG OULIN MACHINERY CO., LTD. , https://www.oulinscrewbarrel.com
The copper wire recycling machine is designed for the efficient recovery of copper from scrap wires and cables, including automotive wires, telecommunication cables, and various types of copper wires. This system consists of a crusher, crushed material channel, vibrating separator, air blower, dust collector, and underbed, ensuring a complete and automated process. It’s ideal for industrial applications where copper recycling is essential.
Scrap Copper Wire Granulator Main Features:
1. No water required—just feed in the cables and wires directly into the system.
2. Turnkey and compact design with PLC control, requiring only 1–2 workers to operate, and occupying minimal space.
3. High purity of copper granules, exceeding 99%.
4. Suitable for communication cables, civilian wires, filament wires, and all single-strand wires.
Final Output of Copper and Plastic Granules:
Copper Separator Machine Working Process:
Model
Processing Capacity
(kg/h)
Processed Wire Dia.
Total Power
Voltage
Dimension
Weight
FC-400-1
80-120
0.3-20mm
11.92KW
Customized
1.5*1.5*1.9m
750kg
FC-400
200-250
23.12KW
2.7*1.9*2.3m
1200kg
FC-600A
300-400
48.36KW
4*1.85*2.4m
3400kg
FC-600
300-400
52.36KW
4.3*1.95*2.4m
3400kg
FC-800
600-800
0.1-40mm
75.4KW
9.1*2.3*3.54m
8000kg
FC-1200
1000-1200
129.6KW
16*10*3m
12000kg
Different Models of Copper Separator Machine:
Contact us freely for more detailed quotation.
Automatic Operating Scrap Copper Cable Granulator Wire Recycling Machine
Model NO.: FC
Function: Scrap Copper Wire Recycling
Structure: Compact
Recycling Method: Dry Type
Applicable Wire: All Kinds of Copper/Aluminum Cable
Working Principle: Crushing & Separating
Processed Wire Diameter: 0.3-40mm
Voltage: Customized
Trademark: FORCHEN
Transport Package: Ply Wooden Case
Specification: weight: 800-12000kg
Origin: Henan, China
HS Code: 8479
Scrap Copper Wire Granulator General Introduction
1. Wires and cables are fed into the crusher, where they are crushed and completely separated into copper and plastic. The length of the crushed material depends on the mesh size of the sieve; larger mesh sizes result in longer material and higher output. The mesh should be selected based on the type of material being processed.
2. The crushed material (a mixture of copper granules and plastic pieces) is transported to the separator via conveyor. During this process, dust and lightweight plastic fragments (such as fibers, ropes, or tapes mixed in the wires) are collected by the pressure-reducing blower. The opening of the blower is connected to the dust collector, which uses a dust collection bag to prevent dust emissions, ensuring environmental protection. Dust and some lightweight plastic particles are collected in the bag and discharged when it is full.
3. The separator is used to separate plastic pieces and copper granules. Based on differences in physical properties and specific gravity, there is a deviation in the separation due to aerodynamic and vibration friction forces. By adjusting the conveying speed and amplitude parameters, copper granules (with higher specific gravity) move to the bottom of the sieve and travel upward, while plastic pieces (with lower specific gravity) move to the top of the copper granules and travel downward. Both materials are finally discharged through different openings.
4. All units are installed on the underbed to form a complete structure. The machine is pre-adjusted and ready for production before shipping, so the customer only needs to connect it to the power supply.
Copper Cable Granulator Technical Parameters: