As we all know, car bumpers mainly play a protective role. However, today's car bumpers are mostly made of plastics. Some people are very puzzled about this. Plastic bumpers are soft and can provide protection. Will it affect the safety performance of the vehicle? Is the plastic bumper really unsafe? Don't worry, let's see if we can analyze the safety of plastic bumpers from a professional perspective.

The role of car bumpers

The automobile bumper is a safety device that absorbs and mitigates external impact and protects the front and rear parts of the vehicle body.

Selection of car bumper materials

In the early days, the front and rear bumpers of automobiles were mainly made of metal materials. They were generally stamped and made of steel plates, riveted or welded together with the frame rails. This design has a large gap with the body and it looks very unattractive. With the development of the automotive industry, and the constant pursuit of harmony and unity with the body shape, the pursuit of lightweight design itself, the final car manufacturers have found a better alternative - plastic bumpers.

Use of plastic car bumpers

It was Fiat that used the plastic bumper for the first time. Since then, this money-saving scheme has been quickly followed by major auto companies. Although many people think that the plastic bumpers used in automobiles are not strong enough and safe, and there are suspicions for cutting corners and materials, major car companies still insist on using plastic materials to create bumpers. There are many reasons for this.

First, the cost of control is easy to design and produce

The automobile production has been moulded. In addition to the body's use of high-strength materials, many parts will use engineering plastics as much as possible. The front and rear bumpers of the car are typical representatives. ,

Plastic bumpers can not only save manufacturing costs, but also have lower requirements on the industrial level and are easier to produce. Therefore, after the cost of building a car is controlled, the price of the final product to the consumer will be more reasonable, which must be corresponding.

Second, more energy can protect pedestrians

Automobile's rigidity is not borne by the bumper, mainly depends on the body frame structure, so in addition to the design and manufacturing costs, plastic insurance can also play a role in protecting pedestrians.

The plastic bumper is more elastic than metal and better absorbs impact due to the material. So we can often see such pictures of bicycles crashing into the bumper on the Internet. If we think about replacing a metal bumper, then the tragedy is likely to be pedestrians and bicycles.

Third, flexibility can avoid small bumps

If there is a slight collision or scraping, the plastic bumper has good elasticity and has a certain impact resistance, which means that if the bumper is touched, the plastic bumper will automatically rebound and automatically repair. Even if it is painted off, it is always stronger than recessed. After all, spray painting is much cheaper than sheet metal repair.

Fourth, anti-corrosion

For the car body, we all know that the metal easily rusts when it is combined with water and air, which not only affects the appearance, but also has certain safety risks. However, although the bumper is a part that is easy to bump in daily driving, the plastic has good corrosion resistance and we do not need to worry about it.

Therefore, automotive rigidity is not measured by bumper stiffness. The use of plastic bumpers not only serves to protect pedestrians, but also makes comparisons for future maintenance. It can be said that both buyers and sellers benefit.

False Twist Two-For-One Twisting Machine

Features:

1. CY250 can produce steaming fold filament from wire silk by one step which will reach to the effect of real like silk.

2. The machine has high flexibility which not only can be used as ordinary Two-For-One Twister, but also can be used for twisting constant heat-setting yarn.

3. Inset ceramic piece in filar guide is used for yarn breaking.

4. Inset ceramic piece in over-feed fixes in two independent drive axis, which is used to control the tension of yarn precisely during the setting and winding.

5. The Silk Wheel is equipped in each over-feed can be adjusted tension of both take-up and inner heater pipe.

6. The yarn refueling device in the machine is an automatically device to fill center fuel tank.(For choice)

7. The machine is equipped with automatic tag-ending device. (For choice)

8. Yarn is in the inlet of heater pipe which has a ceramic silk wheel to lesson the tension of yarn.

9. The computer system control the temperature of heater pipe, which can monitor whether the heater pipe is at normal work or not and working conditions, and the effect will be showed on the computer.

10. The exhaust emission system is connected to user central Control System.

11. The machine is equipped with magnetic false-twist spindle which is easy to operate.

12. Gear case is used for winding, with lip motion device for the soft edge.

13. The control of the whole machine is all installed in the control casing at the head of machine (spindle, false twist spindle, over-feed device and change of twist range).

14. The whole machine carries out digital monitor by a set of software, including: spindle speed, false twist spindle speed, over-feed rate, take-up speed, yarn meter counter, alarm display, working hours, procedure memory and twist direction(S or Z), etc.

False Twist Two-for-one Twisting Machine

False Twist Two-For-One Twisting Machine,False Twister,False Twist Twisting Machine,False Two For One Twisting Machine

ZHEJIANG KAICHENG TEXTILE MACHINERY CO.,LTD , https://www.kaichengtex.com