Rock drilling
machine:
1. Rock drilling
machine is widely used in mines, transportations ,defense, water conservancy, rock
engineer, especially rugged terrain.
2. Rock drilling
machine is low center of gravity, easy to fold and to move.
3. Rock Drilling Machine
has rotator reducer with high torque ensure operating reliable in the case of
strong vibrations or heavy duty.
4.Simple
structure, easy to operate, low cost.
5.Propulsion
system equipped with relief valve, adjusting propulsion, ensure excellent performance
6. Rock drilling
machine has different types, such as hydraulic Rock Drilling Machine and electric Rock drilling machine, and pneumatic Rock drilling machine.
FAQ:
Q: How about
payment terms?
A: 30% TT deposit
+ 70% TT before shipment,50% TT deposit + 50% LC balance, Flexible payment can
be negotiated.
Q: Installation
and commissioning?
A: We will send
our engineer for installation and commissioning, but relevant cost will be paid
by you.
Q: Do you have
some videos where we can see the line producing?
A: Yes, we can
provide some videos for reference.
Rock Drilling Machine Rock Drilling Machine,Portable Rock Drilling Machine,Rock Drill Tools,Rock Drill Rig SHANDONG HENGWANG GROUP , http://www.hwmac.com
I. Features and Uses 1. The S/Z type series is flexible, rapid, and reliable in opening and closing. It usually adopts two-way gate plate bidirectional elastic sealing.
2, the product structure is simple, compact and reasonable, easy maintenance, long service life;
3, for the opening and closing device on the pipeline, must be in full open or fully closed state, not for regulating the flow;
4. There are two types of valve connection: flange and welding. The driving mode is manual and electric, and the structure is more complicated.
Valves can be divided into wedge-type gate valves and parallel gate-type gate valves according to the sealing surface configuration. The wedge-type gate valves have single-gate type, dual-port type, and elastic gate type.
Parallel gate valve can be divided into single gate type and double gate type.
Divided according to the thread position of the valve stem, it can be divided into two kinds: open rod gate valve and dark rod gate valve.
Second, the design and manufacture of water seal gate valve standard design and manufacture: GB12234
Flange size: GB9113JB7490
Pressure temperature: JB/T74GB9131
Structure length: GB/T12221
Inspection and Test: JB/T9092GB13927
Third, the main performance specifications Nominal pressure (MPa)
Shell strength test 1.01.62.54.06.410.0
Sealing test 1.52.43.86.09.615.0
On the seal test 1.11.82.84.47.011.0
Hermetic test 1.11.82.84.47.011.0
Applicable range Product type Applicable temperature (°C) Applicable medium Carbon steel type ≤ 425 Water, steam, oil, non-corrosive gas Alloy type ≤ 540
Fourth, the main parts of the material Product type Part name Valve body, valve cover, bracket Valve stem Gate, valve, sealing surface Seat sealing surface Stem nut Filler alloy steel (I) WCBCr5Mol20Cr1Mo1VA Cobalt-based alloy Hard alloy Aluminum bronze Flexible graphite Carbon Steel Type (C) WCB1Cr13 or 2Cr13Cr13 Stainless Steel or Hard Alloy Stainless Steel Aluminum Bronze Flexible Graphite
Water Sealed Gate Valves Features, Applications, Designs, and Standards
The water seal gate valve is suitable for the back pressure condensing system of thermal power station with working pressure of 1.6～10.0MPa, working temperature of 0～425°C, and pipelines of petroleum and chemical requirements and atmosphere isolation, cutting off or connecting the medium. The applicable medium is: water, oil Products, steam and non-corrosive gases.