How to correctly choose the LED explosion-proof lamp installation position
Posted on

Led explosion-proof light is not an ordinary light, the installation method is also different, the installation location is also particular about the following is a simple introduction to how to properly install led explosion-proof lights.
First, it should be installed in a place where the danger is small
When installing the LED explosion-proof lamp, the explosion-proof lamp should be installed in a relatively safe place, or the lamp should be installed far from the release source. In areas with explosive gas, the installed lines are cable lines and explosion-proof steel pipe lines, which are very important lines.
Second, channels and protective tubes for electrical lines should also be established
When installing the LED explosion-proof lamp, it should also set up the passage of the electrical circuit and the corresponding protective tube, and the outside of the tube should also use non-combustion substances to close the blockage.
Third, the different levels of danger, the type of cable is not the same
Copper conductors should be used in areas with a hazard class 1; multi-stranded copper conductors should be used in areas where frequent vibrations occur frequently; remember that aluminum core power cables cannot be used in coal mines or wells, which is very dangerous of.
Fourth, when selecting the conductor section and the cable section, choose carefully
When selecting the conductor section and the cable section of Zone 1 and Zone 2, select the appropriate section so that the LED explosion-proof lamp can have a good circulation of current to work well.
In general, if you want to install the LED explosion-proof lamp in the correct location, you must first find a place with a low risk. You should also set up the passage and protective tube of the electrical circuit, and select the appropriate cable according to the different levels of danger. Do these things in order to properly install led explosion-proof lights in order to serve us well.
Technical Parameters:
Shape color: ocean king yellow gray forest color
Light source type: Cree CREE brand
Lamp beads number: 60
Explosion-proof mark: Exdemb II CT6
Operating voltage: AC/DC 220V±20% 50Hz
Rated power: 20/30/40/50/60/70/80/100/120/150W
Light source color temperature: warm white 2700~4500K/normal white 5000~6500K
Power factor: 0.98
Power lumens: 8400~12600lm
Protection class: IP65
Anti-corrosion level: WF2
Introduction device: G3/4" inlet specification, suitable Φ 8mm～Φ12mm cable
Installation method: ceiling type, wall type, embedded type, street lamp type
Product weight: 8kg
Overall size: 320×310mm
Packing size: one loaded 410*410*330mm
Two loaded 770*395*325mm
Corporate philosophy: respecting practical and efficient innovation
Quality Assurance:
In strict accordance with ISO9001:2008 international quality management system standards for quality control, to ensure that product quality is higher than the national standard, fully meet the design requirements, the product is implemented for three years warranty, within three years from the date of purchase, the product under normal use of any failure from the The company is responsible for free maintenance.
Power: High-performance waterproof drive, internal surge protection and lightning protection, outdoor use more assured, more secure.
Statement: The LED explosion-proof light produced by Ronglang has passed the aging test for more than 12 hours before leaving the factory, ensuring no failure, and guaranteeing 100% full power, and never making false

DSE Controller  

1.DSE controller is made in United Kingdom , it also is Deep Sea Electronics , An intelligent range of single-set and multi-set generator control solutions, mains  protection relays, lighting tower control solutions, digital automatic voltage regulators, remote communications devices and expansion modules.

2. DSE controller Model

 DSE501K, DSE5110, DSE5120, DSE5210, DSE5220, DSE701, DSE702, DSE703,

 DSE704, DSE3110, DSE7320, DSE7310, DSE7510, DSE5510, DSE8610, DSE710,

 DSE720, P810,DSE808

3. Use for Generators Genset and Diesel Engine controller system .

4. We can supply the Genuine / Original DSE controller , we also can provide replacement made in China has high quality and competitive price .  We can make a solemn commitment to users: within one month, if there is any quality problem, we will replace the product for free and use it for one year


5110 deep sea eletronics

Deep Sea Electrics DSE controller DSE5120 Generator Parts

Other Generator Parts we can provide: 

Generator parts: DSE controller, Comap Controller , Woodward Controller, Cummins Speed Controller, GAC Speed Controller, Generator AVR , Engine Actuators, Engine Sensors , Engine Meters . 




DSE Controller

DSE Controller,Deep Sea Electronics DSE7320,Deep Sea Controller,Deep Sea Controller For Gen-set

Jining Kunpeng Construction Machinery Equipment Co., Ltd , https://www.excavatorenginepart.com