铍 is a type of pollutant that can cause acute and chronic poisoning

SKS, was the birthplace of China's lead-zinc industry, known as "the cradle of Chinese lead and zinc industry," but there is also a major killer of the Xiangjiang River pollution, industrial waste water discharged into the Xiangjiang River, threatening drinking water safety of residents along the coast. Yesterday, the Provincial Environment and Natural Resources Office of Promotion Committee inspection team came to the SKS-ferrous metal smelter limited liability company sixth (hereinafter referred to as non-ferrous metals Shuikoushan Liu Chang), should be completed at the end of beryllium-containing waste water treatment projects, It has just broken ground recently. It is expected that the project will be completed in October. Before that, 800 tons of waste water per day will be discharged directly into the Xiangjiang River, and the daily discharge of toxic metal strontium will be as high as 0.56 kg.

Wastewater containing strontium concentration exceeds 10-20 times

From Hengyang Guiyang to Hengshan Weizhou, the Hengyang water surface of more than 200 kilometers, although the water quality has reached the Class III standard for surface water environmental quality, the huge industrial pollution source pollutant discharge and the construction of urban domestic sewage domestic waste treatment and disposal facilities are lagging behind, Factors such as repairing the dam and prolonging the dry season lead to a decrease in their own water purification capacity. The wastewater containing Shuikoushan Nonferrous Metals Co., Ltd. is one of the most important sources of pollution. At present, the sixth smelter discharges 6,500 tons of industrial wastewater per day, of which 800 tons of waste water is contained in the project. The concentration exceeded the standard multiple of 10-20 times, causing greater pollution to the Xiangjiang River.

The relevant person in charge of the Provincial Environmental Protection Bureau introduced that the plant is the only smelting refinery in China.铍 is a high-tech-related product and an important strategic material. It also has high technical content and economic benefits. However, strontium and its compounds have greater toxicity and are listed in the Integrated Wastewater Discharge Standard. For a class of pollutants, entering the lungs, liver, kidneys and other organs can cause acute and chronic poisoning, endangering people's health.

Since 2004, the waste water treatment of Hengyang Shuikoushan Nonferrous Metals Co., Ltd. has been included in the province's environmental pollution deadline treatment project. The province's environmental protection three-year action plan clearly requires the treatment of waste water containing biological waste by new biologic technology. The project must be completed by the end of December 2005.

Processing technology hinders governance

Why did the project, which was planned to be completed last year, not officially break ground until the end of May this year? "There is only one of us in China, and there are only three in the world. The treatment of technology and technology has become the biggest difficulty in our wastewater treatment." Relevant responsible persons have expressed their difficulties.

The person in charge introduced that in order to solve the problem that the wastewater containing bismuth is difficult to meet the standards, the Sixth Smelter and Central South University jointly developed a new technology for the treatment of strontium-containing wastewater by biological agents. Through many experiments, it has proved that the biological agent has advanced and reliable technology for treating strontium-containing wastewater. The advantages of low processing cost and good effect have won the second prize of Hunan Science and Technology Progress. However, in the process of construction design, it is difficult to realize industrialization due to the use of biosorption columns. The required adsorption columns are relatively large and occupy a large area and cannot be constructed on site. For this reason, Shuikoushan Nonferrous Metal Group Co., Ltd. A number of studies have been carried out with design units, authoritative scientific research units, and experts and professors. It was finally determined that the biosorption column was changed to a biosorption cell, and the effect was basically the same. Therefore, on May 20, 2006, the wastewater treatment project containing strontium was officially started.

After the completion of the project, the annual discharge of 1.2 million tons of sewage, the relevant person in charge of the sixth smelting plant of Shuikoushan introduced that the project started recently will not only treat the wastewater containing strontium, but also fully consider the recycling of industrial wastewater. After the completion of the project, the recycling rate of industrial wastewater will reach 78%, and the annual discharge of sewage to the Xiangjiang River will be about 1.2 million tons, while the concentration of radon in industrial wastewater will be less than 5 μg/L, reaching the Integrated Wastewater Discharge Standard.

After the construction period is officially put into use, the water quality of the Xiangjiang River will be significantly improved, so that the water content of the Xiangjiang Songbai to Hengyang section is less than 0.2 μg/L, reaching the standard of drinking water and eliminating a major hidden danger of the Xiangjiang River. The project is expected to be completed in October this year.

Gutter Downspout Roll Forming Machine

 

Gutter Downspout Roll Forming Machine is the special equipment for continuous rolling and cold-forming on steel sheet. It adopts coiling steel sheet as the raw material, decoiling the coil, continuous rolling and cold-forming, automatically cut to the size and output the finished panel. The equipment adopts PLC control, AC frequency and adjusting the speed technology, and it realizes the continuous automatically production, therefore, it is really a new type of energy-saving and high-effective producing equipment for steel structure.

 

Main parameters of  rain water gutter roll forming machine

Suitable to process: Color steel plate, galvanized sheet, aluminum coils,etc.

Width of the feeding material:According to the profile.

Rollers station: 18 rows.

Thickness of feeding material:0.3-0.8mm

Power:4+4kw

Size:8500*800*1500mm

Productivity: 8-12m/min

Diameter of shaft: 60mm

Weight: About 4.8 Tons

Voltage: 380V 50Hz 3phases

Roller material:Carbon Steel 45#

Material of the cutting : Cr12

Wall thickness of main forming machine: 16mm steel plate

Main frame of the machine:300 H steel

 

Components of line

1.Decoiler                   1 unit

2.Roll Forming System       1 unit

3.Cutting Device               1 unit

4.Hydraulic Station            1 unit

5.PLC control system         1 unit

 

 Working Flow:

Loading coil – decoiling – guide feeding – main roll forming – PLC system - hydrarlic cutting – finished products


Working Flow

Gutter Downspout Roll Forming Machine

Gutter Downspout Roll Forming Machine,Gutter Roll Forming Machine,Steel Downspout Roll Forming Machine,Rain Gutter Roll Forming Machine

CANGZHOU DIXIN ROLL FORMING MACHINE CO., LTD , https://www.hebeimachine.com